ABSTRACT
Temperature determines
the survival of all natural creatures and as well the operational fitness of
all scientific invention, it is quite important to every aspect of human
endeavor and its control is as important as the temperature itself.
This research work
centers its study on temperature and its control with a view of designing and
implementing a reliable computerized system that will automatically contribute
in temperature control.
The new system will be
able to automatically detect temperature within a particular environment
at a particular time and be able to give the desired output concerning the aim
of its development. The new system pivots its temperature on room
temperature, controlling the regulation of the room air conditioning system for
good up- keep of the habitants. The new system can as well be used in other
areas of temperature control by adjusting the target point of the design.
ORGANIZATION OF WORK
This project work is
organized into two phases. The front pages and the main write up.
The front pages which
consists of the title page, certification, dedication, acknowledgement,
organization of work, abstract and table of contents.
The second phase, which
is the work, is made up of seven chapters.
The first chapter is the
introduction, which consist of the statement of problem, aims and objectives,
purpose of study, limitation and definition of term.
Chapter two is the
literature review chapter three is systems investigation and analysis.
Chapter four is the design of the new system. Chapter five is
implementation. Chapter six is documentation while chapter seven
contained the conclusion and recommendation. And finally is bibliography
TABLE OF CONTENTS
Title Page
Organization of work
Abstract
Table of content
CHAPTER ONE
1.0
Introduction
1.1
Statement of the problem
1.2
Purpose of the study
1.3
Aim and Objectives
1.4
Scope of study
1.5
Constraints
1.6
Assumption
1.7
Definition of Terms
CHAPTER TWO
2.0
Literature Review
CHAPTER THREE
3.0
Description and analysis of the existing system
3.1
Fact finding methods used
3.11
References to written document
3.1.2
Browsing of internet
3.2
Input, Process, Output analysis
3.2.1
Input, analysis
3.2.2
Input format
3.2.3
Process, analysis
3.2.4
Output, analysis
3.2.5
Input format
3.3
Problem of the existing system
3.4
Objective of the existing system
3.5
Justification of the new existing system
CHAPTER FOUR
4.0
The design of the new system
4.1
Output specification and design
4.2
Input specification and design
4.3
File design
4.4
File structure
4.5
Procedure chart
4.6
System flowchart
4.7
System requirement
4.71
Hardware requirement
4.72
Soft ware requirement
CHAPTER FIVE
5.0
Implementation
5.1 Program
design
5.2 Pseudo
code
5.3 Program
flowchart
CHAPTER SIX
6.0 Documentation
6.1
Choice of language
6.2 Language
introduction
6.3 Change
over method
CHAPTER SEVEN
7.0 Conclusion
7.1
Recommendation
Bibliography
CHAPTER ONE
1.0 INTRODUCTION
Every living and
non-living things thrived on a particular temperature within a particular
environment at a particular time. Temperature is a concept that cannot
easily be shelved for its importance to man and the thing in its
surrounding. The room temperature is convenient for man’s survival, the
water temperature is convenient for the survival of fishes and other sea
animals, the incubator temperature is convenient for hatching of chick from
eggs. This is the same for every other living thing on the face of the
earth. The same is also applicable to non-living thing on earth,
chemicals, iron etc of different kinds thrives under different temperature.
Due to these facts,
there is need for adequate control of temperature in areas where nature is not
automatically controlling temperature. For example, chicks can only be
hatched in a particular temperature and based on that, the incubator was
designed to control the temperature for hatching the eggs of chicks. The
incubator makes the temperature steady not to fall low or above the hatching
temperature. The same is applicable to almost all manufacturing
companies, breweries, seasoning company etc.
Temperature is very
important in production of a lot of products and seasoning.
Temperature control
requires expertise and accuracy for effectiveness and reliability the computer
with its sophisticated feature assuredly can handle the control of temperature.
1.1
STATEMENT OF THE PROBLEM
Temperature control
system need to be designed on accuracy with effective reception and detection
of environment temperature. This control has to be achieved best without
any human intervention.
Ineffective temperature
control system cause a lot of damages to the system the procedures it is designed
for.
1.2
PURPOSE OF STUDY
The purpose of this
study is to design simulation of a personal computerized temperature control
system which is built on accuracies, comprehensiveness and which will also be
cost effective
1.3
AIMS/OBJECTIVES
The aim of
this project work is to design an effective temperature control system, which
is computer based and which will provide solution to the inaccuracy of he
manual system
The objectives include:
1. To
design a temperature control system that will be very accurate and effective
2. To
design a system that will be quite automatic without any human intervention in
its control
1.4
SCOPE OF STUDY
This work is to simulate
an internal temperature control system for personal temperature control.
Department | Computer Science |
Project ID Code | CMS0043 |
Chapters | 7 Chapters |
No of Pages | 44 pages |
Methodology | Null |
Reference | YES |
Format | Microsoft Word |
Price | ₦4000, $15 |
|
|
Contact Us On | +2348039638328 |
Contact Us On | +2347026816414 |
|